How to clean your computer from dust

1. Take the vacuum cleaner, turn it into an electrical outlet, remove the tube and nozzle so that you kept in the hands of only the hose with handle. Some vacuum cleaners have special small plastic nozzle, can use them.

2. Take a second hand brush and click “Start.” Not on the computer and on the vacuum cleaner!

3. Then, slowly but surely, and most importantly, carefully brushing the motherboard and the system unit. At the same time keep the vacuum cleaner tube five centimeters from the place where brushing. So, all the dust that rises brush will be sucked into the vacuum cleaner – is one of the most important moments in cleaning your computer from dust.

Remove the side cover sistemnika
5. Bolts put in a jar or any other place, about which not forget, that’s where you put the bolts. Who casing snap, he can skip this step.

6. Put the system unit to the right side, so that the face of the motherboard to us. Cleaning your computer from dust and can be standing, but when the system unit is – so much more convenient.

7 is removed from the system unit memory. And do not forget to remove the ends of the board latch. There may be one or two.

disable RAM
8. Next, pull out the video card. It is usually held by a bolt, bolted to the back wall, and the latch on the motherboard. Therefore, do not pull with all his strength, but first remove the bolt and remove the latch.

Turning off the video card
Turning off the video card
9. Furthermore, in your system unit can stand still sound card, modem, etc. Most often they are located under the graphics – they too get.

10. After the above mentioned manipulation disable the hard disk drive (HDD) and drive.

11. All items that you have checked out, spread neatly on the floor, preferably in the order in which you removed them. Knowing the sequence, you will be more convenient to set them back.
Step Two. Cleaning your computer from dust
Read on and find out all the details of the points of how to clean your computer from dust.

Writen by admin